linear solid shaft

High Precision grade Linear motion Guide shaft; Stainless liner shaft, Hollow shaft, perforating shaft,piston rod,

 

Linear Guide Shaft;

 

Materials: SUJ-2

Hardness: HRC Above 60

Roughness: 1.2S(Rmax)

Plating: 20um-30um

Straightness: 50um/1000mm

polished shafts, which are produced by the most advanced equipment, are characterized by high stability and high quality. They are widely applied to a rectilinear motion field and other fields, particularly air cylinders, automatic secret printing presses, automatic cutting machines and automatic industrial machines;

Stainless Steel Linear Shaft

Materials: -Stainess steel

Hardness: 52-56HRC

Roughness: 1.2S(Rmax)

Plating: - Chrome plated is option

Straightness: 50um/1000mm

CIE stainless steel linear shafts are characterized by high corrosion resistance. The products are particularly suitable to be used in an oxidizing environment such as water, chemical gas and oceans.

Both of above mentioned specification available as follows:

 

Model	Diameter(mm)	Precision(um)	Weight(kg/m)	Effective Hardening Layer Depth(mm)
CIE3	3	-2~-8	0.06	>0.8
CIE4	4	-4~-12	0.10
CIE5	5		0.15
CIE6	6		0.23
CIE8	8	-5~-14	0.40
CIE10	10		0.62	>1.0
CIE12	12	-6~-17	0.89
CIE13	13		1.04
CIE16	16		1.58	>1.5
CIE20	20	-7~-20	2.47
CIE25	25		3.85	>2
CIE30	30		5.55
CIE35	35		7.55	>3
CIE40	40	-9~-25	9.87
CIE50	50		15.4

 

 

Hollow Shaft

Materials: SUJ-2

Hardness: HRC 60

Roughness: 1.5S(Rmax)

Plating: 20um-30um

Straightness:

D chrome plated hollow shafts have all functions of solid shafts. Moreover, the products can greatly reduce weight of equipment due to its own hollow structure.Main Functions: Used as guide rods, transmission shafts and supports of all types of electronic equipment and mechanical equipmentCharacteristics: High abrasion resistance, high impossibility of rustiness, high precision and high strength;

 

Model	Inner Diameter(d2)	Outer Diameter(d1)	Outer Diameter Tolerance(um)	Weight(kg/m)	Effective Hardening Layer Depth(mm)
CDP16	10	16	-7~-20	1.25	1.6
CDP20	14	20		1.34	1.8
CDP25	16	25		2.28	2.1
CDP30	17	30		3.77	2.4
CDP35	19	35	-9~-25	5.32	2.5
CDP40	20	40		7.39	2.6
CDP50	25	50		11.55	2.9
CDP60	30	60		15.2	3.0

 

Piston Rod

 

Materials: 45#

Hardness: -

Roughness: 1.2S(Rmax)

Plating: 15um-25um

Straightness: 100um/1000mm

According to requirements of customers, the company also can provide shafts with various diameters, special length and tolerance dimension which are not listed on the list.**Standard Tolerance f7

Perforating Shaft

 

 Materials: SUJ-2

 Hardness: 60-64HRC

 Roughness: 1.2S(Rmax)

 Plating: 20um-30um

 Straightness: 50um/1000mm

 

According to requirements of customers, the company can also provide shafts with various diameters, special length and tolerance dimension which are not listed below**Standard ToleranceISO G6

 

 

 

Hardening and Tempering Shaft

 

 Materials: 40cr

 Hardness: 26-32HRC

 Roughness: 1.2S(Rmax)

 Plating: 20um-30um

 Straightness: 50um/1000mm

 

 

 

 

linear solid shaft